弹上电子部件加速因子估计方法研究

目的针对高可靠长寿命的弹上电子部件在实际贮存环境温度起伏变化的情况,研究基于等效温度的加速因子估计方法。方法首先剖析弹上电子部件失效机理,然后基于阿伦尼斯模型,分析加速应力与实际环境温度的对应关系,求解实际环境等效温度,进而估计加速因子,最后通过某型导弹综合控制器中的时序控制电路板,验证该方法的工程适用性。结果该方法能够真实反映环境温度情况,且与传统加权平均温度计算方法相比,加速因子估计和加速试验时间预测更准确,且随着实际环境温度起伏的增大,优势更加明显。结论该方法在实际贮存环境温度起伏变化的情况下,能够有效提高加速因子估计和加速寿命试验时间预测的准确性,为弹上电子部件加速寿命试验方案设计提供可靠依据,对其他高可靠长寿命产品的加速因子估计也具有一定的参考价值。     

面向2035的节能与新能源汽车全生命周期碳排放预测评价

发展节能与新能源汽车是降低交通运输行业碳排放的重要技术路径.为量化预测节能与新能源汽车的全生命周期碳排放,利用全生命周期评价方法,以汽车相关技术路线和政策为参考,选取燃油经济性、整车轻量化水平、电力结构碳排放因子和氢能碳排放因子为关键参数,构建传统燃油汽车(ICEV)、轻度混合动力汽车(MHEV)、重度混合动力汽车(HEV)、纯电动汽车(BEV)和燃料电池汽车(FCV)的数据清单并对其全生命周期碳排放进行量化预测评价,对电力结构碳排放因子和不同制氢方式碳排放因子进行了敏感性分析和讨论.结果发现,2022年ICEV、 MHEV、 HEV、 BEV和FCV的全生命周期碳排放量(以CO₂-eq计)分别为208.0、 195.5、 150.0、 113.5和205.0 g·km^-1.到2035年,BEV和FCV相比于ICEV具有较为显著的减碳效益,分别降低69.1%和49.3%.电力结构的碳排放因子对BEV的全生命周期碳排放的影响最显著.关于燃料电池汽车的不同制氢方式,短期应以工业副产氢提纯为主供应FCV氢能需求,长期以可再生能源电解水制氢和化石能源...     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).     

贮存寿命评价工具箱设计研究

作为装备贮存可靠性与贮存寿命评价的关键技术,加速寿命试验和加速退化试验已在工程中广泛应用,基于物理分析的贮存寿命特征检测技术也逐步在贮存寿命评价工程中开展。贮存寿命评价技术已有一套完整的理论基础并积累了大量的工程实践经验,但行业内至今仍缺少专门针对贮存寿命评价的软件工具。本文通过对贮存寿命评价工具箱的需求分析研究工作,构建了工具箱的技术框架,并给出工具箱各主要模块的业务流程图和业务概念图,为贮存寿命工具箱的开发提供了支撑。     

关于汽车内饰塑料件气候交变试验的分析

通过对高温条件、低温条件、温湿条件的试验机理进行分析,对气候交变试验标准的合理性提出了质疑,并给出一种对比验证的方法进行验证,以期规范和有机统一不同的气候交变试验标准。另外还探讨了气候交变试验在验证产品生命周期上的意义以及气候交变试验与功能试验结合的必要性。     

国外矿用应急救生舱技术现状

在南非、澳大利亚等矿业发达国家,应急避难室(救生舱)是一种重要的井下应急救援装备,用于在矿井事故发生后保护被困矿工,等待救援。本文对国外现有救生舱产品进行了深入的调研,对救生舱内氧气供应、有害气体去除、空气调节、环境监测、动力供应、附属装备等各主要系统的运行原理和技术指标进行了详细介绍,为分析国外救生舱技术研究现状和研发我国矿井救生舱产品提供参数依据和指导。     

北京和上海典型复合包装废物处置环境影响比较

采用生命周期评价法研究比较了北京和上海两地纸塑铝复合包装处置阶段的环境影响。通过现场和资料调研的方式获得此阶段的能量物质的输入输出和环境外排数据。结果表明:北京和上海两地纸塑铝复合包装处置阶段的环境影响潜值分别为-0.428 Pt和9.776 Pt,其主要集中在气候变化、土地占用和无机物对健康的损害三方面;每提高10%的回收率,其环境影响潜值北京和上海可分别降低5.446 Pt和5.799 Pt;上海地区纸塑铝复合包装处置阶段对环境的影响在任何同回收率的情况都要高于北京地区,其主要原因是上海地区填埋产生的温室气体释放量过大和再生企业距离打包点较远。     

Income Growth, Urbanization, Changing Life Style and Energy Requirements in China

This paper aims to estimate the effects of changing life style and consumption demands driven by income growth and urbanization on increase of energy requirements in China, and es-timate the impacts of improvement in household consumption on mitigating energy requirements towards 2020, based on input-out-put analysis and scenarios simulation approach. The result shows that energy requirement per capita has increased by 159% for urban residents and 147% for rural residents from 1995 to 2004. Growth in household consumption driven by income growth and urbanization may induce a successive increase in energy require-ments in future. Per capita energy requirements of urban residents will increase by 240% during 2002-2015 and 330% during 2002-2020. Urbanization might lead to 0.75 billion ton of increment of energy requirements in 2020. About 45%-48% of total energy requirements in China might be a consequence of residents’ life styles and the economic activities to support consumption demands in 2020. Under low-carbon life style scenario, per capita energy requirements of urban residents may decline to 97% in 2015 and 92% in 2020 in contrast with baseline scenario. That implies that China needs to pay a great attention to developing green low-carbon life style in order to realize mitigation target towards 2020.     

Persistence of Bacillus thuringiensis deposits in a hardwood forest,after aerial application of a commercial formulation at two dosage rates

Abstract

A commercial formulation of Bacillus thuringiensis Berliner var. kurstaki (BTK), Foray® 48B, was sprayed aerially over four blocks B13, B14, B15A and B15B in an oak forest in Wayne County, Pennsylvania during May 1990. B13 and B14 were sprayed at 75 billion international units (BIU) in 5.91 litres/ha and the other two at 50 BIU in 3.94 litres/ha. Oak foliage was collected at different intervals of time after treatment. Three types of bioassays were conducted against fourth instar gypsy moth larvae, viz., direct feeding of sprayed foliage, feeding on diet containing homogenized foliage, and force‐feeding of foliar extracts. Larval mortalities were converted into international units of BTK activity per unit area (IU/cm²) of foliage. Foliar extracts were also subjected to enzyme‐linked immunosorbent assay (ELISA) to determine the concentration of delta‐endotoxin protein. Regardless of the type of bioassay used, bioactivity of BTK persisted in foliage for about a week in all the blocks. The half‐life of inactivation, DT₅₀, ranged from ca 12 to 22 h. The immunoassay data indicated a shorter duration of persistence (i.e., about 2 d) of the delta‐endotoxin protein, with DT₅₀ values ranging from 10 to 15 h. Formulation ingredients present in Foray 48B played a role in the toxicity of BTK to gypsy moth larvae.     

Detection of transfluthrin and metofluthrin genotoxicity in the ST cross of the Drosophila Wing Spot Test

In this study, different concentrations of transfluthrin and metofluthrin have been assayed for genotoxicity by using the Wing Spot Test on Drosophila melanogaster. Standard cross was used in the experiment. Third-instar larvae that were trans-heterozygous for the two genetic markers mwh and flr³ were treated at different concentrations (0.0103 mg mL⁻¹, 0.103 mg mL⁻¹ for transfluthrin and 6 μg mL⁻¹, 60 μg mL⁻¹ for metofluthrin) of the test compounds. Feeding ended with pupation of the surviving larvae and the genetic changes induced in somatic cells of the wing’s imaginal discs lead to the formation of mutant clones on the wing blade. Results indicated that two experimental concentrations of transfluthrin and 60 μg mL⁻¹ metofluthrin showed mutagenic and recombinogenic effects in both the marker-heterozygous (MH) flies and the balancer-heterozygous (BH) flies.